Conforming to EN 1493 Mammut In Ground Lifts comply with the latest European safety regulations.
Control Unit The IP 54/65 protected central control is standard equipped with an automatic synchronisation. Unintentional height differences are thereby avoided. The redundant design of the central control unit – consisting of two SPS controls – provides safety at the highest level.
Emergency Lowering Connected to an external 24 V power supply (e.g. truck or forklift battery) the central control unit can be used to lower the load.
Control Panel The lifting and lowering movements and adjustment functions of the individual lifts can be finely controlled using the control unit.
InlineCover The innovative design of the nogra roll covering, which forms an absolutely level workshop floor, allows work to be done - e.g. with pit lifts - directly above the covering. And the galvanized, joint-free segments can be fully driven over by a wheel load of 3.5 t.
DCS Technology (Dual-Cylinder System) Two separate hydraulic circuits and two separate cylinder systems give all Mammut lifting posts that extra safety-plus.
Hydraulic Pump The special construction allows a constant lifting and lowering speed – either with or without load.
Traverse Together with the extensive programme of matching accessories, just about any vehicle can be lifted easily and, what’s more important, safely.
Stable Connection All oil-bearing parts are directly flanged or tightly piped to the lifting post.
Adjusting Drive A 1 kW gear motor in connection with a guided link chain allows the precise positioning of the individual lifting posts..

In addition to its existing pit-lift models Elephant and EuroLift, nogra now has a further high-performance lifting tool in its new Mammut In Ground Truck Lift. This completely new development not only complies with the current safety regulations of the newly revised EN 1493 standards, it also pays great attention to functional quality and workspace ergonomics.